Feature Introduction

　　The instrument is designed and manufactured in accordance with the requirements specified in T0604-2011, “Penetration Test for Asphalt,” as outlined in JTG E20-2011, “Test Procedures for Asphalt and Asphalt Mixtures in Highway Engineering.” It is suitable for determining the penetration of road petroleum asphalt, modified asphalt, and the residual penetration of liquid petroleum asphalt or emulsified asphalt after evaporation, under low-temperature conditions. With the optional accessories purchased, it can also measure the cone penetration of substances such as paraffin wax and lubricating grease. This instrument finds wide application in the food industry, highway engineering, and other industrial sectors.

　　I. Main Technical Features

　　1. The instrument employs computer control technology to automatically perform the penetration test, ensuring accurate and reliable measurements.

　　2. The instrument is equipped with a low-temperature constant-temperature water bath, with temperature control accuracy reaching ±0.1℃, meeting the constant-temperature requirements within the range of (5.0 to 100.0)℃.

　　3. The lifting mechanism features a novel design and offers effortless, smooth adjustment.

　　4. By separately purchasing different configurations such as standard needles, sample dishes, thermometers, and weights, the equipment can meet the requirements of national standards GB/T 4509-1998 and GB/T 4509-2010.

　　The most distinctive feature of this instrument is that it is equipped with a low-temperature constant-temperature water bath, which can meet the requirements for low-temperature testing. It also features advanced mechanical and circuit designs, enabling fully automatic completion of the needle penetration test.

　 　II. Main Technical Parameters and Specifications

　　Penetration Tester Parameters

　　1. Measurement range: (0–500) penetration degree;

　　2. Resolution: 0.1 needle penetration;

　　3. Time setting range: (0.0–999.9) seconds, with a time error of less than ±0.01 second;

　　4. Heater power: 200W;

　　5. Standard needle: 50 mm, 2.5 g ± 0.05 g (basic configuration);

　　6. Support lifting mechanism: A dual-lifting adjustment mechanism that makes it easy to align the needle tip with the sample surface.

　　7. External dimensions: 280mm × 350mm × 700mm (length × width × height).

　　Constant Temperature Water Bath Parameters

　　1. Bathtub volume: 5.5 L.

　　2. Temperature range: (5.0～100.0)℃.

　　3. Temperature control accuracy: ±0.1℃.

　　4. Total power consumption of the entire machine: Not greater than 1800W.

　　5. External dimensions: 420mm × 380mm × 900mm (length × width × height).

　　Power supply: AC (220 ±10%) V; 50 Hz.

　　Special Note:

　　The standard configuration complies with the JTG E20-2011 standard; other configurations shall be purchased separately according to the requirements specified when the customer places the order.