All
- All
- Product Management
- News and Information
- Introduction content
- Enterprise outlets
- Frequently Asked Questions
- Corporate Video
- Company Portfolio
Introduction to the Asphalt Mixture Compaction Tester
1. First, connect the three plugs at the back of the cabinet properly. The “motor” should be connected to the motor input port on the cabinet, the “non-contact proximity switch” should be connected to the counting port, and the “power supply” should be connected to the power supply port. At the same time, make sure the neutral wire is properly connected.
2021-09-09
Precautions and Instructions for Use of the Asphalt Mixture Compaction Tester
1. First, connect the three plugs at the back of the cabinet properly. The “motor” should be connected to the motor input port on the cabinet, the “non-contact proximity switch” should be connected to the counting port, and the “power supply” should be connected to the power supply port. At the same time, make sure the neutral wire is properly connected.
2021-09-06
Instructions for Using the Asphalt Penetration Tester
1.1 This method is applicable to the determination of the penetration of road petroleum asphalt, polymer-modified asphalt, and the residue remaining after distillation of liquid petroleum asphalt or emulsified asphalt—measured in units of 0.1 mm using a needle. The standard test conditions are as follows: temperature 25℃, load 100 g, and penetration time 5 s.
2021-09-01
Precautions and Instructions for Use of the Asphalt Mixture Compaction Tester
1. The counter counts in a forward-counting manner.
2021-08-25
Operating Procedures for the Intelligent Tracking Multi-Functional Electric Compactor
1. After unpacking, first carefully open both side doors to check whether any parts have fallen off or fastening components are loose (due to transportation). Make sure the lifting hook and chain are positioned between the two guide rods, so that the hook won’t derail once the machine is started.
2021-08-18