- All
- Product Management
- News and Information
- Introduction content
- Enterprise outlets
- Frequently Asked Questions
- Corporate Video
- Company Portfolio
Operating Procedures for the Intelligent Tracking Multi-Functional Electric Compactor
2021-08-18
Operating Procedures for the Intelligent Tracking Multi-Functional Electric Compactor
1. After unpacking, first carefully open both side doors to check whether any parts have fallen off or fastening components are loose (due to transportation). Make sure the lifting hook and chain are positioned between the two guide rods, so that the hook won’t derail once the machine is started.
2. Connect the machine to a 220V power supply, preset the number of impacts on the counter located on the side of the machine, then turn on the power and run the machine at no-load for 5 to 10 impacts (Note: there must be a rubber pad or other soft cushion inside the impact cylinder). Observe whether the impact cylinder rotates smoothly and at even intervals. Only when the machine is operating normally can you proceed with the formal experiment.
3. Select the appropriate hammer and compaction cylinder. Gradually pour the pre-prepared soil sample into the compaction cylinder in layers. After each layer is poured, press the “Start” button to initiate the compaction process; the counter will begin counting down. When the number of compaction blows reaches the preset value on the counter, the machine will automatically stop. Then, proceed to pour the next layer of soil, repeating the above procedure. The entire compaction process must be carried out in accordance with the requirements for compaction tests specified in the geotechnical testing standards.
4. After the compaction is completed, disconnect the power supply, thoroughly clean the compaction cylinder and the compaction hammer, and sweep and tidy up the laboratory.
1. The system’s default value is negative counting mode.
2. Equipped with a jog function, allowing you to test the motor’s rotation direction.
3. Adjustable and preset compaction cycles.
4. Manually resettable.
5. It features a pause function; interrupting the process mid-way does not affect the number of compaction cycles.
Relevant Information
The main advantages of the penetration tester are:
2023-11-02
The working principle of the compaction apparatus mainly includes the following points:
2023-10-23
2023-10-13