All
- All
- Product Management
- News and Information
- Introduction content
- Enterprise outlets
- Frequently Asked Questions
- Corporate Video
- Company Portfolio
Working Principle of a Pouring-Type Asphalt Mixing Plant
After the pouring-type asphalt mixture mixer is powered on, the main mixing motor is started via a start/stop switch equipped with maintenance functions. Once the equipment has entered its normal operating state, the amorphous refractory material or the object to be mixed can then be added into the mixer’s mixing bowl.
2021-05-11
Operating Procedures for the Asphalt Penetration Tester
4.1. Adjust the constant-temperature water bath to the required experimental temperature—25℃, or 15℃, 30℃, etc.—as specified in the experiment request, and maintain stability.
2021-05-06
Instructions for Use and Maintenance of the Asphalt Mixture Compaction Tester
1. After each experiment, be sure to clean the machine thoroughly, apply oil to both the test cylinder and the rack, and disconnect the power supply (reconnect it only when you’re ready to work again).
2021-04-25
Experimental Procedure for the Asphalt Penetration Tester
4.1. Adjust the constant-temperature water bath to the required experimental temperature—25℃, or 15℃, 30℃, etc.—according to the experimental requirements, and maintain stability.
2021-04-19
Equipment characteristics of the rotary compactor
1. A high-hardness steel is used for the frame to ensure precise angle control.
2021-04-12